EUFY Clean G35 Vacuum Cleaner Manual

The EUFY Clean G35 is a powerful robotic vacuum cleaner designed to provide efficient cleaning for various floor types. It features advanced navigation technology, multiple cleaning modes, and a long-lasting battery. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Vacuum 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Smart navigation, multiple cleaning modes, HEPA filtration, and a user-friendly app for remote control.

Feature	Description
Smart Navigation	Efficient path planning for thorough cleaning
HEPA Filter	Traps allergens and fine dust particles
Multiple Cleaning Modes	Auto, Spot, and Edge cleaning options
Long Battery Life	Up to 100 minutes of cleaning on a single charge
App Control	Control and schedule cleaning via smartphone app

Installation

Unpack and inspect contents. Place the charging dock on a flat surface.

Connect the charging dock to a power outlet.
Ensure the area around the dock is clear for the vacuum to dock properly.
Charge the vacuum fully before first use.

WARNING! Keep the charging dock away from moisture and heat sources.

First-Time Setup

Power on the vacuum; follow the app instructions for setup.

Download the EUFY app and create an account.
Connect the vacuum to your Wi-Fi network.
Set cleaning schedules and preferences through the app.

CAUTION! Ensure the vacuum is on a stable surface during setup.

Specifications

Model: EUFY Clean G35
Battery: Lithium-ion, 2600mAh
Charging Time: Approximately 5 hours
Run Time: Up to 100 minutes
Dimensions: 12.8 x 12.8 x 3.1 inches
Weight: 6.5 lbs
Dustbin Capacity: 0.6 liters
Filtration: HEPA filter

Controls and Settings

Access settings via the EUFY app or the physical buttons on the vacuum.

Remote: Start/stop cleaning, change modes, and schedule cleaning.

Cleaning Modes: Auto, Spot, Edge, and Manual.

Connecting Devices

Connect the vacuum to your Wi-Fi network for app control.

Ensure the vacuum is charged and powered on.
Follow the app instructions to connect to Wi-Fi.
Control the vacuum remotely via the app.

Tip: Keep the vacuum within range of your Wi-Fi router for optimal performance.

Operating the Vacuum

To start cleaning, press the power button or use the app.

Press the power button to turn on.
Select cleaning mode via the app or remote.
Monitor cleaning progress through the app.

WARNING! Do not block the vacuum's sensors during operation.

Maintenance and Care

Regularly clean the dustbin and filter for optimal performance.

CAUTION! Unplug the charging dock before cleaning.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Vacuum not charging	Power source issue	Check outlet and charging dock connection.
No suction	Clogged filter	Clean or replace the filter.
Remote not working	Batteries	Replace remote batteries.
Vacuum not connecting to Wi-Fi	Network issue	Check Wi-Fi settings and reconnect.

Reset: Use the reset button if available.

Support: Visit www.eufy.com or contact customer service for assistance.