EUFY RoboVac G20 Vacuum Cleaner Manual

The EUFY RoboVac G20 is a powerful robotic vacuum cleaner designed to provide efficient cleaning with minimal effort. It features smart navigation technology, strong suction power, and a slim design that allows it to clean under furniture easily. The RoboVac G20 is equipped with a large dustbin, multiple cleaning modes, and is compatible with voice assistants for added convenience. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Cleaning Modes 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Smart navigation, strong suction, large dustbin, multiple cleaning modes, and voice assistant compatibility.

Feature	Description
Smart Navigation	Efficient path planning for thorough cleaning
Strong Suction Power	Up to 2000Pa for deep cleaning
Large Dustbin	Holds more dirt and debris for less frequent emptying
Multiple Cleaning Modes	Auto, Spot, and Edge cleaning options
Voice Assistant Compatibility	Works with Alexa and Google Assistant

Installation

Unpack and inspect contents. Place RoboVac on a flat surface.

Charge the RoboVac: Connect the charging dock to a power outlet.
Place RoboVac on the dock: Ensure it aligns with the charging pins.
Download the app: Install the EUFY Home app on your smartphone.
Connect to Wi-Fi: Follow the app instructions to connect RoboVac to your home network.

WARNING! Ensure the charging dock is placed in a clear area for optimal navigation.

First-Time Setup

Power on RoboVac; follow app prompts.

Connect to Wi-Fi: Ensure your smartphone is connected to the same network.
Set cleaning schedule: Use the app to schedule cleaning times.
Adjust settings: Customize suction power and cleaning modes in the app.

CAUTION! Keep the area clear of obstacles for best performance.

Specifications

Battery: 2600mAh lithium-ion.
Charging Time: Approximately 6 hours.
Run Time: Up to 100 minutes on a single charge.
Dimensions: 12.8 x 12.8 x 2.85 inches.
Weight: 5.5 lbs.
Noise Level: 55 dB during operation.
Dustbin Capacity: 0.6 liters.
Connectivity: Wi-Fi 2.4GHz.

Controls and Settings

Access settings via the EUFY Home app or the physical buttons on RoboVac.

Physical Buttons: Power, Clean, and Dock.

App Features: Schedule cleaning, adjust suction power, and monitor cleaning history.

Connecting to Wi-Fi

Ensure RoboVac is powered on and within range of your Wi-Fi network.

Open the EUFY Home app and select "Add Device."
Follow the prompts to connect RoboVac to your Wi-Fi.
Confirm connection by checking the app for status updates.

Tip: Keep your router close to the charging dock for better connectivity.

Cleaning Modes

RoboVac offers several cleaning modes for different needs.

Auto Mode: For general cleaning of the entire area.
Spot Mode: For concentrated cleaning in a specific area.
Edge Mode: For cleaning along walls and corners.

WARNING! Do not use RoboVac on wet surfaces.

Maintenance

Regular maintenance is essential for optimal performance.

Empty the dustbin after each use.
Clean the filters every month.
Check for tangled hair or debris around the brushes.

CAUTION! Always turn off RoboVac before performing maintenance.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
RoboVac not charging	Charging dock not connected	Ensure dock is plugged in and RoboVac is aligned correctly.
No suction	Clogged filter	Clean or replace the filter.
RoboVac not connecting to Wi-Fi	Incorrect password	Double-check Wi-Fi password and try reconnecting.
RoboVac gets stuck	Obstacles in the way	Clear the area of obstacles and restart RoboVac.
Remote not working	Batteries dead	Replace batteries in the remote control.

Reset: Use the app to reset RoboVac if necessary.

Service: For support, contact EUFY customer service.