EUFY RoboVac G30 Vacuum Cleaner Manual

The EUFY RoboVac G30 is a smart robotic vacuum cleaner designed to provide efficient cleaning with minimal effort. It features advanced navigation technology, powerful suction, and a slim design that allows it to clean under furniture. The RoboVac G30 is equipped with Wi-Fi connectivity, allowing you to control it via a smartphone app or voice commands through smart home devices. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Cleaning Modes 8. Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Smart navigation, powerful suction, Wi-Fi connectivity, slim design, and multiple cleaning modes.

Feature	Description
Smart Navigation	Uses advanced sensors to navigate around obstacles and clean efficiently.
Powerful Suction	Provides strong suction power to pick up dirt, dust, and pet hair.
Wi-Fi Connectivity	Control your RoboVac remotely via the EufyHome app.
Multiple Cleaning Modes	Choose from various cleaning modes to suit your needs.
Rechargeable Battery	Long-lasting battery for extended cleaning sessions.

Installation

Unpack and inspect contents. Place the charging dock in a clear area.

Connect the charging dock to a power outlet.
Ensure the area around the dock is free of obstacles.
Place RoboVac on the dock to charge before first use.

WARNING! Ensure the charging dock is placed on a flat surface for optimal charging.

First-Time Setup

Power on RoboVac and follow the app instructions for setup.

Download the EufyHome app from the App Store or Google Play.
Create an account or log in.
Follow the in-app instructions to connect RoboVac to Wi-Fi.
Start your first cleaning session.

CAUTION! Ensure RoboVac is fully charged before first use.

Specifications

Model: EUFY RoboVac G30.
Battery Type: Lithium-ion.
Battery Capacity: 2600mAh.
Charging Time: Approximately 6 hours.
Run Time: Up to 100 minutes.
Dimensions: 12.8 x 12.8 x 2.85 inches.
Weight: 5.5 lbs.
Noise Level: 55 dB.

Controls and Settings

Access settings via the EufyHome app or use the physical buttons on the RoboVac.

Remote: Start/stop cleaning, change modes, schedule cleanings.

Settings: Adjust cleaning modes, set schedules, and check battery status through the app.

Connecting to Wi-Fi

Ensure your smartphone is connected to the Wi-Fi network you want RoboVac to use.

Open the EufyHome app and select "Add Device."
Follow the prompts to connect RoboVac to your Wi-Fi network.
Ensure the Wi-Fi signal is strong where the RoboVac will operate.

Tip: Keep your router close to the charging dock for better connectivity.

Cleaning Modes

RoboVac offers various cleaning modes to suit different cleaning needs.

Auto Mode: For general cleaning.
Spot Mode: For concentrated cleaning in a specific area.
Edge Mode: For cleaning along walls and edges.

WARNING! Do not use RoboVac on wet surfaces.

Maintenance

Regular maintenance is essential for optimal performance.

Empty the dustbin after each use.
Clean the filters every month.
Check for tangled hair or debris around the brushes.

CAUTION! Always turn off RoboVac before performing maintenance.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth only; no liquids or aerosols.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
RoboVac does not start	Battery low	Charge RoboVac for at least 6 hours.
No suction	Clogged filter	Clean or replace the filter.
Wi-Fi connection issues	Weak signal	Move the charging dock closer to the router.
RoboVac gets stuck	Obstacles	Clear the area of obstacles.
Remote not working	Batteries dead	Replace remote batteries.

Reset: Use the app to reset RoboVac if necessary.

Service: For support, visit www.eufylife.com or contact customer service.