EUFY RoboVac T2109 Vacuum Cleaner Manual

The EUFY RoboVac T2109 is a powerful robotic vacuum cleaner designed to provide efficient cleaning with minimal effort. It features advanced navigation technology, a strong suction power, and a slim design that allows it to clean under furniture and in tight spaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Smart navigation, strong suction, multiple cleaning modes, remote control, and a large dustbin.

Installation

Unpack and inspect contents. Place the charging dock on a flat surface.

1. Connect the charging dock to a power outlet.
2. Ensure the area around the dock is clear of obstacles.
3. Place RoboVac on the dock to charge before first use.

WARNING! Ensure the charging dock is plugged in and the area is safe for operation.

First-Time Setup

Power on RoboVac; follow the app prompts for setup.

1. Download the EUFY Home app on your smartphone.
2. Connect RoboVac to your Wi-Fi network through the app.
3. Set cleaning schedules and modes via the app.

CAUTION! Ensure RoboVac is fully charged before first-time setup.

Specifications

• Model: EUFY RoboVac T2109.
• Battery: 2600mAh lithium-ion.
• Charging Time: Approximately 5-6 hours.
• Run Time: Up to 100 minutes on a single charge.
• Suction Power: 1500Pa.
• Dustbin Capacity: 0.6 liters.
• Dimensions: 12.8 x 12.8 x 3.0 inches.
• Weight: 5.5 lbs.

Controls and Settings

Access controls via the remote or the EUFY Home app. Key functions include Start, Stop, and Mode selection.

Remote: Start, Stop, Spot Clean, and Home buttons.

Settings: Adjust cleaning modes, schedule cleaning times, and check battery status through the app.

Connecting to Wi-Fi

Ensure your smartphone is connected to the Wi-Fi network you want RoboVac to use.

1. Open the EUFY Home app and select RoboVac.
2. Follow the on-screen instructions to connect to Wi-Fi.
3. Ensure the Wi-Fi signal is strong in the area where RoboVac will operate.

Tip: Keep your app updated for the best performance.

Cleaning Modes

RoboVac offers various cleaning modes to suit different needs.

1. Auto Mode: For general cleaning.
2. Spot Mode: For concentrated cleaning in a specific area.
3. Edge Mode: For cleaning along walls and edges.
4. Scheduled Mode: Set specific times for RoboVac to clean.

WARNING! Ensure the area is clear of small objects before cleaning.

Maintenance

Regular maintenance ensures optimal performance.

1. Empty the dustbin after each use.
2. Clean the filters every month.
3. Check for tangled hair or debris in the brushes.

CAUTION! Always turn off RoboVac before performing maintenance.

Care & Cleaning

Unplug the charging dock before cleaning. Use a dry cloth to wipe the surface.

CAUTION! Do not use liquids or aerosols on RoboVac.

Regulatory Information

This device complies with FCC Part 15. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Reset: Use the reset button if RoboVac is unresponsive.

Service: For support, contact EUFY customer service.